EC1523 | GAC ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

12VDC / Packard Connector without Mating Connector / Lever Included

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Aluminum Gold Anodized

M8 I.D. End and Thread

10 Turn / 5KΩ / With Knob

24VDC / Light-Force (Low-Current Optimized PID)

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

Multi-VDC / Temperature Compensated

Multi-VDC / CAT HUEI System to GAC LSM/SYC

10 Turn / 10KΩ

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

24VDC / Full-Fuel Starting Aid

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

MSP / Engine Speed Simulator, Alligator Clips, General Usage

5-Star Torx Bit - Pump Cover Screws (Service Tool)

Multi-VDC / Two Element Speed Switch - Overspeed, Crank

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

12VDC / Packard Connector without Mating Connector

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included