ESD5500-II | GAC Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

12VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

EDG6000 - Programming Interface Assembly with Serial Port

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

10 Turn / 5KΩ / With Locking Shaft

Multi-VDC / Overspeed Switch

M5 I.D. End and Thread 14mm Deep

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

10VDC (From Speed Control) / Variable Speed - Off-Road

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

4.86 in. [123mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

1 Turn / 20KΩ / With Knob / Droop Control

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

Multi-VDC / Standard Unit

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

180 Series Installation Kit - Spare (Included with Actuator) - Freeze Plug & Hardware

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware