TSE307 | GAC EDG6000 - Programming Interface Assembly with Serial Port

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

Multi-VDC / Anti-Windup Circuit (Gaseous) / Recommended for T3/T4 ATBs

12VDC / Light-Force (Low-Current Optimized PID)

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

24VDC / Standard Unit with Idle

176 Series Installation Kit - Bosch A Pump Bearing Retainer - Plate, Gasket, and Shims

24VDC / Packard Connector without Mating Connector / Includes GA102

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

24VDC / Light-Force (Low-Current Optimized PID)

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

MSP / Engine Speed Simulator, Alligator Clips, General Usage

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

24VDC / Packard Connector without Mating Connector

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

4.86 in. [123mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

2.37 in. [60mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals / Aluminum Gold Anodized

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

Multi-VDC / Automatic Synchronizer with Sync Check Relay

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

12VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2