EDG6000 | GAC Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

10 Turn / 20KΩ / With Locking Shaft

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

Multi-VDC / Overspeed Switch

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

EDG6000 - Programming Interface Assembly with Serial Port

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

Multi-VDC / Standard Unit

Multi-VDC / Standard Unit

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

12VDC / Standard Unit

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

M5 I.D. End and Thread 14mm Deep

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

5-Star Torx Bit - Pump Cover Screws (Service Tool)

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

24VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses, 12-24V DC/DC Converter (PCI106)

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ