ADB120E4 | GAC Multi-VDC / Military-Style Connector without Mating Connector / Includes Fuel Metering Valve KT6723 and Check Valve VA410063

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

24VDC / Standard Unit

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

12VDC / Terminal Strip

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

24VDC / Standard Unit with Idle

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

12VDC / Standard Unit

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

24VDC / Packard Connector without Mating Connector / Oil Drain Fitting / Designed for Deutz 1015 Engines / Stop Lever LE1400-4 Included

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

120E4 Series - Mounting Bracket for Cummins 855 Engines

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

M8 I.D. End and Thread

MSP Military-Style (Amphenol) Sensors - 13 ft. [4m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

USB to RS232 Adapter for PC Interface, GAC Recommended

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

1 Turn / 5KΩ / With Knob

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

Multi-VDC / Two Element Speed Switch - Overspeed, Crank