MSP677 | GAC 3 in. 76mm Thread Length / Military-Style Connector without Mating Half Connector / Stainless

10VDC (From Speed Control) / Variable Speed - Off-Road

12VDC / Light-Force (Low-Current Optimized PID)

12VDC / Packard Connector without Mating Connector / Lever Included

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

12VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

AFR Series - Mating Connector #1 Kit / 35-Terminal

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

Multi-VDC / Standard Unit

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

12VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

24VDC / Packard Connector without Mating Connector / Includes GA102

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

10 Turn / 20KΩ / With Locking Shaft

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

12VDC / Packard Connector without Mating Connector

DPG100/101-F & DFT200 Handheld Configuration Tool

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

12VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

24VDC / Standard Unit / Flying Leads

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

24VDC / Packard Connector without Mating Connector