ESD2401-12 | GAC 12VDC / Standard Unit

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Packard Connector without Mating Connector / Lever Included

12VDC / Standard Unit

Multi-VDC / Overspeed Switch

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

12VDC / Light-Force (Low-Current Optimized PID)

10 Turn / 10KΩ

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

12VDC / Standard Unit / Flying Leads

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

24VDC / Standard Unit with Idle

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

24VDC / Standard Unit / Flying Leads

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

M5 I.D. End and Thread 14mm Deep

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

M6 I.D. End and Thread

ALN050 Series Installation Kit - Bosch RSV / Right Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

24VDC / Standard Unit

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ