MSP6734 | GAC 3.45 in. 88mm Thread Length / 4 in. 100mm Harness / Flying Leads / Aluminum Gold Anodized

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

12VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

ALN Series - Clevis Kit Only

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

10 Turn / 1KΩ

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

MSP / Engine Speed Simulator, Alligator Clips, General Usage

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

1 Turn / 20KΩ / With Knob / Droop Control

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

12VDC / Deutsch Connector without Mating Connector / Same as ACD110A

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

6A / 63V Field

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

M6 I.D. End and Thread

24VDC / Packard Connector without Mating Connector / Lever Included

ALN050 Series Installation Kit - Bosch RSV / Right Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

100 Series - Actuator Mounting Gasket Spare (Included with Actuator)

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

USB to RS232 Adapter for PC Interface, GAC Recommended

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

EDG6000 - Programming Interface Assembly with Serial Port

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated