EC1360 | GAC MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

10VDC (From Speed Control) / Fixed Speed

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

Multi-VDC / Standard Unit

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

24VDC / Woodward 2301A to GAC LSM/SYC

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

100 Series - Actuator Mounting Gasket Spare (Included with Actuator)

MSP / Engine Speed Simulator, Alligator Clips, General Usage

JDR Series - Mating Connector Kit / 6-Terminal

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

AFR Series - Mating Connector #1 Kit / 35-Terminal

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

12VDC / Packard Connector without Mating Connector

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

Multi-VDC / Light-Force (Low-Current Optimized PID)

24VDC / Light-Force (Low-Current Optimized PID)

EDG6000 Series - Mating Connector Kit / 14-Terminal

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

ALN Series - Clevis Kit Only

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

Multi-VDC / Standard Unit