KT295 | GAC 295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

DPG100/101-F & DFT200 Handheld Configuration Tool

12VDC / Standard Unit

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

EDG6000 Series - Mating Connector Kit / 14-Terminal

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

12VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

110 Series - Mating Connector Kit / 2-Terminal

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

24VDC / Terminal Strip

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

24VDC / Standard Unit

Multi-VDC / Standard Unit

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

Multi-VDC / Overspeed Switch

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203