KT275 | GAC 175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

24VDC / Terminal Strip

Multi-VDC / Temperature Compensated

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

Multi-VDC / Anti-Windup Circuit (Gaseous) / Recommended for T3/T4 ATBs

6A / 63V Field

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Stainless

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

M5 I.D. End and Thread 14mm Deep

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

120E4 Series - Fuel Valve Service Replacement Kit

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

12VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

24VDC / Packard Connector without Mating Connector / Lever Included

3 in. [76mm] Thread Length / Military-Style Connector / Same as MSP677 except with Mating Connector Kit EC1100 (Straight) / Stainless

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

DPG100/101-F & DFT200 Handheld Configuration Tool

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal