SYC6714 | GAC Multi-VDC / Automatic Synchronizer with Sync Check Relay

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / 90˚ Connector EC1110 / 2-Terminal

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

24VDC / Volvo EMS I & II EFI Control (2.875V Nominal Input) to GAC LSM/SYC

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

AFR Series - Mating Connector #1 Kit / 35-Terminal

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

12VDC / Packard Connector without Mating Connector / Lever Included

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

12VDC / Light-Force (Low-Current Optimized PID)

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

10 Turn / 5KΩ / With Knob

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

MSP Packard Sensors - 10 ft. [3m] Shielded Harness / 2-Terminal

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

Multi-VDC / CAT HUEI System to GAC LSM/SYC

24VDC / Packard Connector without Mating Connector / Lever Included