MSP6714 | GAC 3.0 in. 76mm Thread Length / Military-Style Connector without Mating Half Connector / Stainless

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Light-Force (Low-Current Optimized PID)

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

24VDC / Standard Unit with Idle

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

24VDC / Packard Connector without Mating Connector / Lever Included

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

10 Turn / 20KΩ / With Knob

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

120E4 Series - Fuel Valve Service Replacement Kit

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included

2.7 in. [69mm] Thread Length / 1 ft. [0.3m] Shielded Cable / Flying Leads / Stainless

EDG6000 - Programming Interface Assembly with Serial Port

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD