EAM122-24 | GAC 24VDC / Volvo EMS I & II EFI Control (2.875V Nominal Input) to GAC LSM/SYC

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

Multi-VDC / Standard Unit

Multi-VDC / Military-Style Connector without Mating Connector / Includes Fuel Metering Valve KT6723 and Check Valve VA410063

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

110 Series - Mating Connector Kit / 2-Terminal

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

24VDC / Light-Force (Low-Current Optimized PID)

12VDC / Terminal Strip

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

Multi-VDC / MTU M-DEC to GAC LSM/SYC

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

24VDC / Packard Connector without Mating Connector / Includes GA102

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

USB to RS232 Adapter for PC Interface, GAC Recommended

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Stainless

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

10 Turn / 5KΩ / With Locking Shaft

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

10 Turn / 10KΩ

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

24VDC / Standard Unit / Flying Leads

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized