CH1206 | GAC ADC Commercial Actuators - 4 ft. 1.2m Harness / 2-Terminal

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

12VDC / Packard Connector without Mating Connector

DPG100/101-F & DFT200 Handheld Configuration Tool

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

M8 I.D. End and Thread

24VDC / Light-Force (Low-Current Optimized PID)

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

24VDC / Woodward 2301A to GAC LSM/SYC

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

10 Turn / 5KΩ / With Knob

MSP Military-Style (Amphenol) Sensors - 13 ft. [4m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

24VDC / Standard Unit

10 Turn / 10KΩ

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

12VDC / Deutsch Connector without Mating Connector / Same as ACD110A

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)