EC1350 | GAC MSP Packard Sensors - Mating Connector Kit / 2-Terminal

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

24VDC / Packard Connector without Mating Connector / Lever Included

EDG6000 - Programming Interface Assembly with Serial Port

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

10 Turn / 20KΩ / With Locking Shaft

12VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

M5 I.D. End and Thread 14mm Deep

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

M8 I.D. End and Thread

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

Multi-VDC / Two Element Speed Switch - Overspeed, Crank

10VDC (From Speed Control) / Fixed Speed

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

24VDC / Light-Force (Low-Current Optimized PID)

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless