EEG6500 | GAC Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

24VDC / Light-Force (Low-Current Optimized PID)

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

USB to RS232 Adapter for PC Interface, GAC Recommended

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

10 Turn / 5KΩ / With Knob

2.37 in. [60mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals / Aluminum Gold Anodized

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

Multi-VDC / Standard Unit

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

12VDC / Light-Force (Low-Current Optimized PID)

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

12VDC / Standard Unit / Flying Leads

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

10 Turn / 5KΩ / With Locking Shaft

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

AFR Series - Mating Connector #1 Kit / 35-Terminal

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)