CH1515 | GAC ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. 1.8m Shielded Harness with EC1515 / 6-Terminal

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

12VDC / Standard Unit

24VDC / Terminal Strip

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

120E4 Series - Fuel Valve Service Replacement Kit

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

24VDC / Light-Force (Low-Current Optimized PID)

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

USB to RS232 Adapter for PC Interface, GAC Recommended

10 Turn / 5KΩ / With Knob

M8 I.D. End and Thread

12VDC / Packard Connector without Mating Connector / Lever Included

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

24VDC / Packard Connector without Mating Connector

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Aluminum Gold Anodized