EC1331 | GAC JDR Series - Mating Connector Kit / 6-Terminal

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

EDG6000 - Programming Interface Assembly with Serial Port

ALN Series - Clevis Kit Only

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

24VDC / Packard Connector without Mating Connector

12VDC / Standard Unit

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

12VDC / Packard Connector without Mating Connector / Includes GA102

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

24VDC / Light-Force (Low-Current Optimized PID)

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

12VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal