EC1110 | GAC MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

24VDC / Packard Connector without Mating Connector / Oil Drain Fitting / Designed for Deutz 1015 Engines / Stop Lever LE1400-4 Included

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

24VDC / Terminal Strip

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

120E4 Series - Fuel Valve Service Replacement Kit

Multi-VDC / CAT HUEI System to GAC LSM/SYC

24VDC / Full-Fuel Starting Aid

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

24VDC / Standard Unit

Multi-VDC / Light-Force (Low-Current Optimized PID)

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

100 Series - Actuator Mounting Gasket Spare (Included with Actuator)

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

M8 I.D. End and Thread

12VDC / Terminal Strip

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output