GA102 | GAC 100 Series - Actuator Mounting Gasket Spare (Included with Actuator)

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

24VDC / Standard Unit

Multi-VDC / Temperature Compensated

12VDC / Standard Unit

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

24VDC / Terminal Strip

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

12VDC / Light-Force (Low-Current Optimized PID)

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

Multi-VDC / One Element Speed Switch - Overspeed

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

M5 I.D. End and Thread 14mm Deep

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

24VDC / Standard Unit

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

24VDC / Universal - Caterpillar & Cummins / 4-20mA or 0-5VDC Load Sharing Input / 100% Max Duty Cycle Output

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

12VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

6A / 63V Field

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

12VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / Standard Unit

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]