BR200 | GAC 1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

24VDC / Volvo EMS I & II EFI Control (2.875V Nominal Input) to GAC LSM/SYC

JDR Series - Mating Connector Kit / 6-Terminal

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

12VDC / Packard Connector without Mating Connector

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

12VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

24VDC / Light-Force (Low-Current Optimized PID)

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

120E4 Series - Fuel Valve Service Replacement Kit

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

Multi-VDC / Deutsch Connector without Mating Connector / Voltage Variable Speed Input 0-5VDC

MSP / Engine Speed Simulator, Alligator Clips, General Usage

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal