LSM672N | GAC Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

12VDC / Packard Connector without Mating Connector / Lever Included

2.7 in. [69mm] Thread Length / 1 ft. [0.3m] Shielded Cable / Flying Leads / Stainless

Multi-VDC / Automatic Synchronizer with Sync Check Relay

12VDC / Terminal Strip

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

120E4 Series - Mounting Bracket for Cummins 855 Engines

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

24VDC / Standard Unit / Flying Leads

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

24VDC / Standard Unit with Idle

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

Multi-VDC / Switchable Soft Coupling and Lead Circuit

10 Turn / 5KΩ / With Knob

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

10 Turn / 10KΩ

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Aluminum Gold Anodized

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)