CH1219 | GAC MSP Packard Sensors - 10 ft. 3m Shielded Harness / 2-Terminal

12VDC / Packard Connector without Mating Connector

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / High Temperature Coil for Full Duty Cycle Operation / Not equivalent to Renault 5010438374 which has Saab Connector (Contact GAC for Renault Version)

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

Multi-VDC / Light-Force (Low-Current Optimized PID)

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

110 Series - Mating Connector Kit / 2-Terminal

24VDC / Full-Fuel Starting Aid

M8 I.D. End and Thread

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

2.7 in. [69mm] Thread Length / 1 ft. [0.3m] Shielded Cable / Flying Leads / Stainless

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

Multi-VDC / One Element Speed Switch - Overspeed

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

Multi-VDC / Overspeed Switch

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

12VDC / Standard Unit

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

12VDC / Standard Unit / Flying Leads

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

USB to RS232 Adapter for PC Interface, GAC Recommended