LAM100 | GAC Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

12VDC / Light-Force (Low-Current Optimized PID)

120E4 Series - Mounting Bracket for Cummins 855 Engines

Multi-VDC / Military-Style Connector without Mating Connector / Includes Fuel Metering Valve KT6723 and Check Valve VA410063

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

24VDC / Packard Connector without Mating Connector

10 Turn / 10KΩ

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

12VDC / Packard Connector without Mating Connector

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Aluminum Gold Anodized

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output

12VDC / Light-Force (Low-Current Optimized PID)

12VDC / Standard Unit / Flying Leads

EDG6000 - Programming Interface Assembly with Serial Port

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

1 Turn / 5KΩ / With Knob

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

Multi-VDC / Automatic Synchronizer with Sync Check Relay

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

24VDC / Standard Unit

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

24VDC / Standard Unit

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Universal - Caterpillar & Cummins / 4-20mA or 0-5VDC Load Sharing Input / 100% Max Duty Cycle Output

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

Multi-VDC / Light-Force (Low-Current Optimized PID)

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal