KT291 | GAC ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

12VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / Deutsch Connector without Mating Connector / Voltage Variable Speed Input 0-5VDC

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

USB to RS232 Adapter for PC Interface, GAC Recommended

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

10 Turn / 5KΩ / With Locking Shaft

24VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

1 Turn / 5KΩ / With Knob

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

ALN050 Series Installation Kit - Bosch RSV / Right Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

24VDC / Standard Unit

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

3 in. [76mm] Thread Length / High Output 913Ω / Military-Style Connector without Mating Half Connector / Stainless

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

12VDC / Packard Connector without Mating Connector / Includes GA102

10 Turn / 1KΩ

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

12VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

10 Turn / 20KΩ / With Locking Shaft