IGA225S-24 | GAC 24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

12VDC / Terminal Strip

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

10VDC (From Speed Control) / Variable Speed - Off-Road

1 Turn / 5KΩ / With Knob

Multi-VDC / Switchable Soft Coupling and Lead Circuit

12VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

24VDC / Volvo EMS I & II EFI Control (2.875V Nominal Input) to GAC LSM/SYC

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

12VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

5-Star Torx Bit - Pump Cover Screws (Service Tool)

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

12VDC / Packard Connector without Mating Connector / Includes GA102

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

12VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

24VDC / Full-Fuel Starting Aid

12VDC / Light-Force (Low-Current Optimized PID)

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

4.86 in. [123mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

10 Turn / 20KΩ / With Knob

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC