EAM210 | GAC 24VDC / Universal - Caterpillar & Cummins / 4-20mA or 0-5VDC Load Sharing Input / 100% Max Duty Cycle Output

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

12VDC / Light-Force (Low-Current Optimized PID)

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Stainless

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

100 Series - Actuator Mounting Gasket Spare (Included with Actuator)

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

24VDC / Standard Unit / Flying Leads

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

120E4 Series - Fuel Valve Service Replacement Kit

10 Turn / 5KΩ / With Locking Shaft

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

24VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

12VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

12VDC / Terminal Strip

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

12VDC / Packard Connector without Mating Connector

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal