ESD5550M | GAC Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

Multi-VDC / Standard Unit

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

12VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

24VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

Hard Potted / Measures Generator Line Current through CT and Signals Speed Control to Compensate / Adjustable Time Constant and Amplitude

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

24VDC / Terminal Strip

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

MSP Military-Style (Amphenol) Sensors - 13 ft. [4m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

DPG100/101-F & DFT200 Handheld Configuration Tool

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

12VDC / Packard Connector without Mating Connector / Kubota 07 Series V2607, V3007, V3307

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

12VDC / Packard Connector without Mating Connector

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)