ESD2110 | GAC Multi-VDC / Standard Unit

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

Multi-VDC / Military-Style Connector without Mating Connector / Includes Fuel Metering Valve KT6723 and Check Valve VA410063

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

Multi-VDC / Standard Unit

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

Multi-VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

M5 I.D. End and Thread 14mm Deep

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

12VDC / Packard Connector without Mating Connector / Includes GA102

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

10 Turn / 20KΩ / With Locking Shaft

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

M6 I.D. End and Thread

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Standard Unit

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

4.86 in. [123mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Aluminum Gold Anodized

24VDC / Light-Force (Low-Current Optimized PID)

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

120E4 Series - Mounting Bracket for Cummins 855 Engines

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

24VDC / Universal - Caterpillar & Cummins / 4-20mA or 0-5VDC Load Sharing Input / 100% Max Duty Cycle Output

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)