EAM100 | GAC 24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector / Same as MSP6728 with Mating Connector Kit EC1350 / Stainless

10 Turn / 1KΩ

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

120E4 Series - Fuel Valve Service Replacement Kit

12VDC / Terminal Strip

10 Turn / 5KΩ / With Locking Shaft

120E4 Series - Mounting Bracket for Cummins 855 Engines

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

6A / 63V Field

MSP6741 - Mating Connector Kit / 2-Terminal / Metri-Pack 150 Series (Unsealed)

24VDC / Universal / 4-20mA Input / 0-5VDC Output / Reverse Polarity

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

24VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

Multi-VDC / Military-Style Connector without Mating Connector / Includes Fuel Metering Valve KT6723 and Check Valve VA410063

24VDC / Universal - Caterpillar & Cummins / 4-20mA or 0-5VDC Load Sharing Input / 100% Max Duty Cycle Output

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

110 Series - Mating Connector Kit / 2-Terminal

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

Multi-VDC / Automatic Synchronizer with Sync Check Relay

24VDC / Standard Unit with Idle

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

12VDC / Light-Force (Low-Current Optimized PID)