ALN190-F04-24 | GAC 24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. 152mm Leads / Farymann 18 W

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

2.37 in. [60mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals / Aluminum Gold Anodized

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

Multi-VDC / Overspeed Switch

120E4 Series - Mounting Bracket for Cummins 855 Engines

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

3 in. [76mm] Thread Length / High Output 913Ω / Military-Style Connector without Mating Half Connector / Stainless

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

10 Turn / 10KΩ

M8 I.D. End and Thread

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001)

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

M6 I.D. End and Thread

Multi-VDC / Two Element Speed Switch - Overspeed, Crank

Multi-VDC / Standard Unit

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

120E4 Series - Fuel Valve Service Replacement Kit

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

10 Turn / 5KΩ / With Locking Shaft

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

24VDC / Full-Fuel Starting Aid