ESD5330 | GAC 24VDC / Standard Unit

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

Installation Bracket - ALN050 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

24VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses, 12-24V DC/DC Converter (PCI106)

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Stainless

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

1 Turn / 5KΩ / With Knob

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

10 Turn / 1KΩ

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

Multi-VDC / Overspeed Switch

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

24VDC / Full-Fuel Starting Aid

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

EDG6000 - Programming Interface Assembly with Serial Port

Multi-VDC / Temperature Compensated

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

M8 I.D. End and Thread

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

12VDC / Light-Force (Low-Current Optimized PID)

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

24VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

10 Turn / 5KΩ / With Knob

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE