AFR211 | GAC Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

Multi-VDC / CAT HUEI System to GAC LSM/SYC

24VDC / Light-Force (Low-Current Optimized PID)

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

Multi-VDC / Military-Style Connector without Mating Connector / Includes Fuel Metering Valve KT6723 and Check Valve VA410063

120E4 Series - Fuel Valve Service Replacement Kit

Multi-VDC / Switchable Soft Coupling and Lead Circuit

Multi-VDC / One Element Speed Switch - Overspeed

24VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / Position Feedback Sensor / Stop Lever LE1400-4 Included

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

6A / 63V Field

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

Multi-VDC / Two Element Speed Switch - Overspeed, Crank

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

2.37 in. [60mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals / Aluminum Gold Anodized

10 Turn / 1KΩ

12VDC / Light-Force (Low-Current Optimized PID)

2.7 in. [69mm] Thread Length / 1.5 ft. [0.46m] Harness / Automotive Connector / Aluminum

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

24VDC / Full-Fuel Starting Aid

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

24VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

24VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses, 12-24V DC/DC Converter (PCI106)