CH1215 | GAC ADD (Packard) Actuators - 6 ft. 1.8m Harness with EC1300 / 2 Terminal

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / 90˚ Connector EC1110 / 2-Terminal

12VDC / Packard Connector without Mating Connector

10VDC (From Speed Control) / Variable Speed - Off-Road

12VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

JDR Series - 15 ft. [4.6m] Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

Multi-VDC / Overspeed Switch

12VDC / Standard Unit / Flying Leads

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

ALN Series - Clevis Kit Only

10 Turn / 5KΩ / With Locking Shaft

24VDC / Standard Unit with Idle

1 Turn / 20KΩ / With Knob / Droop Control

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

3 in. [76mm] Thread Length / Military-Style Connector / Same as MSP677 except with Mating Connector Kit EC1100 (Straight) / Stainless

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

Multi-VDC / Switchable Soft Coupling and Lead Circuit

24VDC / Packard Connector without Mating Connector

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

10 Turn / 10KΩ

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

EDG6000 Series - Mating Connector Kit / 14-Terminal

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

12VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit