ECC328-24 | GAC 24VDC / Light-Force (Low-Current Optimized PID)

120E4 Series - Fuel Valve Service Replacement Kit

M8 I.D. End and Thread

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

12VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

24VDC / Packard Connector without Mating Connector

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

JDR Series - Mating Connector Kit / 6-Terminal

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

12VDC / Standard Unit

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

Multi-VDC / Light-Force (Low-Current Optimized PID)

10 Turn / 20KΩ / With Locking Shaft

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

MSP Automotive Sensors - 10 ft. [3m] Shielded Cable / 2-Terminal

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

Multi-VDC / Military-Style Connector without Mating Connector / Includes Fuel Metering Valve KT6723 and Check Valve VA410063

12VDC / Standard Unit

12VDC / Standard Unit / Flying Leads

24VDC / Interface Module Scania S6 (EMS) EFI SY to GAC LSM/SYC / Nominal 5VDC Input / 1.6VDC Output