ESD5528E | GAC Multi-VDC / Anti-Windup Circuit (Gaseous) / Recommended for T3/T4 ATBs

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

AFR Series - Mating Connector #1 Kit / 35-Terminal

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

24VDC / Light-Force (Low-Current Optimized PID)

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

24VDC / Packard Connector without Mating Connector / Includes GA102

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

12VDC / Deutsch Connector without Mating Connector / Same as ACD110A

Multi-VDC / Standard Unit

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

120E4 Series - Fuel Valve Service Replacement Kit

175 Series Installation Kit - For Zexel RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gaskets (Governor Housing and Actuator), Hardware

12VDC / Standard Unit

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / Straight / 6-Terminal

3 in. [76mm] Thread Length / Military-Style Connector / Same as MSP677 except with Mating Connector Kit EC1100 (Straight) / Stainless

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

24VDC / Deutsch Connector without Mating Connector / Same as ACD110A

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed)

Multi-VDC / Light-Force (Low-Current Optimized PID) / For Cummins EFC Forward Acting (Normally Closed) / Enhanced Droop / Smoke Limiting

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

10 Turn / 1KΩ

12VDC / Packard Connector without Mating Connector

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

10 Turn / 20KΩ / With Knob

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)