EC1501 | GAC AFR Series - Mating Connector #1 Kit / 35-Terminal

4.86 in. [123mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

12VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

12VDC / Packard Connector without Mating Connector / Includes GA102

1 Turn / 20KΩ / With Knob / Droop Control

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

Multi-VDC / Temperature Compensated

24VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

120E4 Series - Mounting Bracket for Cummins 855 Engines

24VDC / Light-Force (Low-Current Optimized PID)

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

24VDC / Military-Style Connector without Mating Connector / Note - Compatible with EEG6500 Series

175 or 275 Installation Kit - Bosch P 7000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

ACB, ADB, T4 (Military-Style) Actuators - Mating Connector Kit / 90˚ / 6-Terminal

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

Multi-VDC / Automatic Synchronizer with Sync Check Relay

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

24VDC / Universal - Caterpillar & Cummins / 4-20mA or 0-5VDC Load Sharing Input / 100% Max Duty Cycle Output

24VDC / Packard Connector without Mating Connector / Kubota Super 05 Series D905, D1005, D1105, D1105-T, V1305, V1505, V1505-T & V3 Industrial Series V3300, V3600, V3600-T, V3800 (not DI-T)

12VDC / Terminal Strip

10 Turn / 5KΩ / With Knob

M5 I.D. End and Thread 14mm Deep

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

12VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware