GECS104 | GAC Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

12VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

12VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

12VDC / Standard Unit

ADC Commercial Actuators - 4 ft. [1.2m] Harness / 2-Terminal

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Aluminum Gold Anodized

10VDC (From Speed Control) / Fixed Speed

USB to RS232 Adapter for PC Interface, GAC Recommended

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

Multi-VDC / MTU M-DEC to GAC LSM/SYC

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

2.29 in. [58mm] Thread Length / 9 in. [228mm] Harness / Metri-Pack 150 Series (Unsealed) without Mating Connector EC1518 / Aluminum

Multi-VDC / Deutsch Connector without Mating Connector / Voltage Variable Speed Input 0-5VDC

Multi-VDC / Military-Style Connector without Mating Connector / Sand-Cast Housing

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

4.3 in. [110mm] - Actuator Control Lever - 1/4 in. [6.35mm] Holes / Serrated Shaft

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

24VDC / Detroit Diesel DDEC 3 Controller to GAC LSM/SYC

12VDC / Packard Connector without Mating Connector / Lever Included

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

MSP Military-Style (Amphenol) Sensors - 27 ft. [8.2m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

12VDC / Standard Unit / Flying Leads