EAM101 | GAC 24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

24VDC / Full-Fuel Starting Aid

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

24VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses, 12-24V DC/DC Converter (PCI106)

3 in. [76mm] Thread Length / High Output 913Ω / Military-Style Connector without Mating Half Connector / Stainless

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

Multi-VDC / Light-Force (Low-Current Optimized PID)

175 or 275 Installation Kit - Bosch P 3000 Series Camshaft Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

275 Installation Kit - MTU - Bosch P 7000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

100 Series - Actuator Mounting Gasket Spare (Included with Actuator)

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

175 Series Installation Kit - Bosch EDC Governor Housing - Mounting Plate, Linkage, Gasket, Hardware

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

ACE275K, ACE295F, ATBT2/T3-F (AB Position Sensor) Actuators - 6 ft. [1.8m] Shielded Harness with EC1515 / 6-Terminal

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

10VDC (From Speed Control) / Fixed Speed

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

12VDC / Standard Unit / Flying Leads

12VDC / Standard Unit

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

3 in. [76mm] Thread Length / Military-Style Connector / Same as MSP677 except with Mating Connector Kit EC1100 (Straight) / Stainless