MSP6740 | GAC 1.7 in. 43mm Thread Length / 6 ft. 1.8m Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

10VDC (From Speed Control) / Fixed Speed

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

24VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

4 in. [102mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

10 Turn / 5kΩ / Multiple Variable Speed Control / Vernier Dial

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

10 Turn / 5KΩ / With Knob

12VDC / Packard Connector without Mating Connector / Lever Included

Multi-VDC / Standard Unit

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

AFR Series - 8 ft. [2.4m] Harness / Flying Leads / 35-Wires

12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

ADC (Commercial) Actuators - 7 ft. [2.13m] Harness / 2-Terminal

24VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

3.0 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

4A / 63V Field / Rear Facing Pots / Replaces Basler AVC63-4D & BE350, McPherson SS350, and Marathon SE350

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

24VDC / Variable Speed DC Generator Control / Integrated Current Transformer / 200A Input / 0-8VDC Output / Built-In Power Meter Output

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]