TP509 | GAC 10 Turn / 20KΩ / With Knob

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

MSP Military-Style (Amphenol) Sensors - 13 ft. [4m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

24VDC / Standard Unit with Idle

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

24VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

Multi-VDC / Light-Force (Low-Current Optimized PID)

10 Turn / 5KΩ / With Knob

24VDC / Terminal Strip

M8 I.D. End and Thread

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

Multi-VDC / Perkins 1306-E87 7M351 to GAC LSM/SYC

12VDC / Packard Connector without Mating Connector / Single (ADD) or Double Rack Bearing (ACD) / Bosch Install Kit KT289 (ADD) or BYC ASIMCO KT283 (ACD) Included

12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

M5 I.D. End and Thread 14mm Deep

SDG Series - Programming Harness for SDG514 & 524 with Serial Port

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

1 Turn / 20KΩ / With Knob / Droop Control

Multi-VDC / No Display - Requires PC / Multiple PID Capability / 14-Terminal Mating Connector not Included

180 Series Installation Kit - Spare (Included with Actuator) - Freeze Plug & Hardware

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

Multi-VDC / Standard Unit

24VDC / Universal - Caterpillar & Cummins / 4-20mA or 0-5VDC Load Sharing Input / 100% Max Duty Cycle Output

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

MSP Military-Style (Amphenol) Sensors - 10 ft. [3m] Shielded Harness / Straight Connector EC1100 / 2-Terminal

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

10VDC (From Speed Control) / Fixed Speed

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

USB to RS232 Adapter for PC Interface, GAC Recommended

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Same as MSP6730 except with Packard Connector without Mating Connector / Stainless