KT188 | GAC 180 Series Installation Kit - Spare (Included with Actuator) - Freeze Plug & Hardware

24VDC / Terminal Strip

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

ALN050 Series Installation Kit - Bosch RSV / Left Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

3.45 in. [88mm] Thread Length / 2.25 in. [57mm] Harness / Same as MSP6734 except with Packard Connector without Mating Connector / Aluminum Gold Anodized

ATB T1/T4-F, ADB335F (Novotechnik Position Sensor) Actuators - Mating Connector Kit / 3-Terminal

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

Multi-VDC / Standard Unit

Multi-VDC / Two Element Speed Switch - Overspeed, Crank

Multi-VDC / Deutsch Connector without Mating Connector / Resistive Variable Speed Input 5kΩ

EDG6000 Series - Mating Connector Kit / 14-Terminal

M6 Thread Precut to 8.75 in. [222mm], Zinc Plated

24VDC / Light-Force (Low-Current Optimized PID)

12VDC / Packard Connector without Mating Connector / Lever Included

Installation Bracket - ALN025 Starter Plate (Rectangular with Holes Pre-Drilled for Mounting Actuator)

JDR Series - Mating Connector Kit / 6-Terminal

3 in. [76mm] Thread Length / High Output 913Ω / Military-Style Connector without Mating Half Connector / Stainless

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

Multi-VDC / CAT HUEI System to GAC LSM/SYC

5-Star Torx Bit - Pump Cover Screws (Service Tool)

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

M6 I.D. End and Thread

Multi-VDC / Overspeed Switch

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

Multi-VDC / MTU M-DEC to GAC LSM/SYC

12VDC / Terminal Strip

12VDC / Packard Connector without Mating Connector / Kubota 03 Series V2003, V2203, V2403

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

10 Turn / 10KΩ

24VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

24VDC / Cummins EFC Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input

ALN Series - Clevis Kit Only

120E4 Series - Fuel Valve Service Replacement Kit