EC1330 | GAC SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

DPG100/101 & DFT200 PS2-USB PC Adapter for use with GAC SmartVu Windows Software

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

12VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses

175 Series Installation Kit - Motorpal Mi Series - PPxM10P1i Fuel Injection Pumps (Note x = 4 or 6 Cylinders) - Plate, Linkage, and Mounting Hardware / Note - same as KT188-2

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

Multi-VDC / One Element Speed Switch - Overspeed

Multi-VDC / Standard Unit

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

2.37 in. [60mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals / Aluminum Gold Anodized

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit / Position Feedback Sensor (AB)

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

24VDC / Standard Unit

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

24VDC / Woodward (8290-038) Speed Control to GAC LSM/SYC

120E4 Series - Mounting Bracket for Cummins 855 Engines

Multi-VDC / Standard Unit

24VDC / Heinzmann EG or KG6-04/10-04 Speed Control to GAC LSM/SYC

1 Turn / 20KΩ / With Knob / Droop Control

24VDC / Barber Colman - Dyna 1 & 8000 Speed Control to GAC LSM/SYC / 5kΩ Trim Pot Input / Selectable 50/60Hz Operation

24VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

Multi-VDC / MTU M-DEC to GAC LSM/SYC

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Same as MSP6721 with Mating Harness CH1206 / Stainless

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

MSP Automotive Sensors - 4 ft. [1.2m] Unshielded Cable / 2-Terminal

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input