RSC672 | GAC 10VDC (From Speed Control) / Fixed Speed

Multi-VDC / Standard Unit

24VDC / Woodward 2301A to GAC LSM/SYC

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

ADD/ADE175 Series Installation Kit - Spare for Bosch-Style Pumps (Included with Actuator) - Hardware, Gasket, Shutoff Plate, Spring, Retainer, Linkage / Note - KT289 includes all of KT283

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

12VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

24VDC / Packard Connector without Mating Connector / Heavy Duty Bearing Retention / No Stop Lever Included

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

MSP Packard Sensors - Mating Connector Kit / 2-Terminal

Multi-VDC / Standard Unit

24VDC / Packard Connector without Mating Connector

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

Multi-VDC / Light-Force (Low-Current Optimized PID) / Anti-Windup Circuit (Gaseous) / Recommended for T1/T2 ATBs

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

24VDC / Male Push-On Terminals / Isuzu L-Series 3LB1, 3LD1, 3LD2, 4LE1, 4LE2

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

DPG100/101-F & DFT200 Handheld Configuration Tool

Multi-VDC / Standard Unit

24VDC / Standard Unit with Idle

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

12VDC / Packard Connector with Mating Connector EC1300 / Cold Start Solenoid / Install Kit KT291 Included

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

24VDC / Packard Connector without Mating Connector / Includes KT295 Installation Kit

110 Series - Mating Connector Kit / 2-Terminal

AFR Series - Mating Connector #1 Kit / 35-Terminal

Multi-VDC / For Cummins EFC Reverse Acting or Fire Pump Applications / Expanded Frequency Range 10.5kHz

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

M6 I.D. End and Thread

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Lesser Rate Return Spring SP203 / Thin Rubber Stop 26 Degrees Travel

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

24VDC / Packard Connector without Mating Connector / Oil Drain Fitting / Designed for Deutz 1015 Engines / Stop Lever LE1400-4 Included

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware