MSP6751 | GAC 5.0 in. 127mm Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

12VDC / Packard Connector without Mating Connector / Shibaura (Perkins) N843-C, N844L-C, N844LT-C (Caterpillar C-series or Volvo D2, contact GAC)

MSP / Engine Speed Simulator, Alligator Clips, General Usage

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability

24VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses, 12-24V DC/DC Converter (PCI106)

24VDC / Standard Unit with Idle

3.0 in. [76mm] Thread Length / Military-Style Connector / Same as MSP6714 except with Mating Connector Kit EC1100 (Straight) / Stainless

12VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

ALN Series - Clevis Kit Only

24VDC / Packard Connector without Mating Connector

10 Turn / 1KΩ

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

Multi-VDC / Temperature Compensated

ADD (Packard) Actuators - Connector Kit Replacement / 2-Terminal

Multi-VDC / Built-In Display / Terminal Strip / All Actuators (Including ACB2001) / Built-In Configurable Speed Switch Output / Advanced CAN J1939 support / Battery Voltage, Hour Meters / Variable Speed 0-5VDC or 4-20mA Input

24VDC / Packard Connector with Mating Connector Kit EC1300 / With Installation Kit KT292 (O-Ring, Bolts)

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

10 Turn / 5KΩ / With Knob

24VDC / Terminal Strip [Compatible with ESD5330/5340 and NEW EEG6500 Series]

3.45 in. [88mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6724 with Mating Harness CH1206 / Aluminum Gold Anodized

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors / Same as MSP6732 with Mating Connector Kit (Qty 2) EC1350 / Stainless

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included

M6 I.D. End and Thread

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m] / Greater Rate Return Spring SP207

10 Turn / 20KΩ / With Locking Shaft

24VDC / Standard Unit / Flying Leads

ADD/ADE176AA Series Installation Kit - Spare (Included with Actuator) - Hardware, Spring, Retainer, Plate, Seal

Multi-VDC / Two Element Speed Switch - Overspeed, Crank

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

Multi-VDC / CAT HUEI System to GAC LSM/SYC