RD233 | GAC M6 Thread Precut to 8.75 in. 222mm, Zinc Plated

12VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

12VDC / Light-Force (Low-Current Optimized PID)

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

24VDC / Standard Unit

6A / 63V Field

3.16 in. [80mm] Thread Length / 3.25 in. [83mm] Harness / Dual Output / Dual Packard Connectors without Mating Connectors / Stainless

ACE275K, ACE295F, ATBT2/T3-F, 175/176AF (AB Position Sensor) Actuators - Mating Connector Kit / 6-Terminal

275 Installation Kit - MTU - Bosch P 3000 Bearing Retainer Kit - Plate, Gasket, Seal, Shims, Hardware

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / 90° Connector EC1010 / 6-Terminal

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

Multi-VDC / Three Element Speed Switch - Overspeed, Crank, Parallel

24VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

Multi-VDC / SMARTTOUCH® Keypad / Fixed & Variable Speed / Droop

24VDC / Packard Connector without Mating Connector

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Automotive Connector / Same as MSP6723 with Mating Harness CH1206 / Stainless

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

175 Series Installation Kit - Bosch A Pump / Right Hand Rack - Includes Adapter Plate, Bearing Retainer (KT176A), Spring, Gaskets, Linkage, Hardware

5 in. [127mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

12V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

10 Turn / 1KΩ

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

10 Turn / 10KΩ

Multi-VDC / Temperature Compensated

5.0 in. [127mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.3kΩ

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

10VDC (From Speed Control) / Basic Isochronous Load Sharing / Load Anticipation / Droop

Multi-VDC / Light-Force (Low-Current Optimized PID)

Multi-VDC / For Cummins EFC Reverse-Acting (Normally Open)

4.86 in. [123mm] Thread Length / Military-Style Connector / Same as MSP678 except with Mating Connector EC1100 (Straight) / Stainless

Multi-VDC / Replacement for Most ESD5500E Series in a Single Unit

Multi-VDC / Overspeed Switch / Expanded Gain and Stability Range (Replace Ghana Controls)

12VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

12VDC / Normal Acting - Push / Packard Connector without Mating Connector and 6 in. [152mm] Leads / Farymann 18 W