TP511 | GAC 10 Turn / 10KΩ

M5 I.D. End and Thread 14mm Deep

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With Straight Cable Clamp & Weather Boot / 2-Terminal

JDR Series - Mating Connector Kit / 6-Terminal

24VDC / Packard Connector without Mating Connector / Yanmar TNE and TNV Series 2TNE, 3TNE, 4TNE and 2TNV, 3TNV, 4TNV & Isuzu C-Series 2CA, 3CA, 3CB, 3CD, 3CE

2.37 in. [60mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

12VDC / Packard Connector without Mating Connector / Install Kit KT291 Included

24V / ADC225S with Integrated EDG6000 / Requires EC1502 or CH1520 (Not Included)

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

Installation Bracket - 225 Series to Woodward Dyna 8000 Footprint (Raised Base so Shafts Line-Up)

24VDC / Military-Style Connector without Mating Connector / Specially Designed for MTU / Stop Lever LE1400-4 Included

10 Turn / 20KΩ / With Locking Shaft

24VDC / Packard Connector without Mating Connector

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

Multi-VDC / Automatic Synchronizer with Sync Check Relay

Multi-VDC / MTU M-DEC to GAC LSM/SYC

10VDC (From Speed Control) / Variable Speed - Off-Road

AFR Series - Mating Connector #1 Kit / 35-Terminal

3.19 in. [81mm] Thread Length / 6.25 in. [159mm] Harness / Packard Connector without Mating Connector / Stainless

3.45 in. [88mm] Thread Length / 4 in. [100mm] Harness / Flying Leads / Aluminum Gold Anodized

12VDC / Packard Connector without Mating Connector

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

Multi-VDC / One Element Speed Switch - Overspeed

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

Multi-VDC / Military-Style Connector without Mating Connector / Stop Lever LE1400-4 Included

3 in. [76mm] Thread Length / Military-Style Connector without Mating Half Connector / Stainless

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

24VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

DPG100/101-F & DFT200 Handheld Configuration Tool

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

12VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

12VDC / Packard Connector without Mating Connector / Lever Included

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

175 Series Installation Kit - For Bosch RS/RSV Governor / Right Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware