ALN050-12 | GAC 12VDC / 13.0 lbf. 6.0 kg / 0.50 ft-lb 0.68 J Work / Male Push-On Terminals

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

3.19 in. [81mm] Thread Length / 2.75 in. [70mm] Harness / Automotive Connector / Stainless

ALN050 Series Installation Kit - Bosch RSV / Right Side - Bracket, Bearings, Rod, Stop Lever, Clevis, Installation Hardware

Multi-VDC / One Element Speed Switch - Overspeed

1.7 in. [43mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

24VDC / Packard Connector without Mating Connector / Stop Lever LE1400-4 Included

ACB, ADB, ATB-T4 Military-Style (Amphenol) Actuators - 12 ft. [3.6m] Harness / Straight Connector EC1000 / 6-Terminal

24VDC / Packard Connector without Mating Connector / Perkins 403D-15, 403D-15T & Caterpillar C1.7

24VDC / Drives 2 Identical Actuators Simultaneously (Diesel or Gaseous)

Multi-VDC / Cummins QST30 & QSK45-78 to GAC LSM/SYC

24VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Barber Colman Dyna 2 Load Sharing (80100, 80101, 80104, 80105) to GAC ESD

24VDC / Packard Connector without Mating Connector / Lever Included

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated

Multi-VDC / Universal - Galvanic Isolation / 1x 0-5VDC, 1x 0-10VDC, 1x 4-20mA Input / 0-5VDC Output

EDG6000 Series - 8 ft. [2.4m] Harness / Flying Leads / 14-Wires

24VDC / 6.5 lbf. [3.0 kg] / 0.25 ft-lb [0.34 J] Work / Male Push-On Terminals

3.19 in. [81mm] Thread Length / 7 in. [178mm] Harness / Flying Leads / Stainless

Multi-VDC / Built-In Display / Terminal Strip - SUPERCEDED BY EEG6500, SERVICE ONLY

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

3.13 in. [79mm] Thread Length / 3 in. [76mm] Harness / Packard Connector without Mating Connector / Stainless

3.5 in. [89mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ / Aluminum

24VDC / Universal / 1-4VDC Input / 4-20mA Output / Deutz Position Interface

275 Installation Kit - RP21 Series - Adapter Plate, Link, Hardware

12VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

ADD (Packard) Actuators - Mating Connector Kit / 2-Terminal

24VDC / Right Side Stop Assembly / Installation Kit (Gasket, Bolts) Included

12VDC / Commercial Connector with Mating Harness CH251-2134 7 ft. [2.13m]

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

Multi-VDC / Two Oxygen Sensor Inputs (Pre and Post Catalyst) and EGT (Type-K Thermocouple) Input

24VDC / Standard Unit

Basic Engine Controller / Crank Pause and Overspeed Switch / Preheat Capabilities / Keyswitch

Multi-VDC / Light-Force (Low-Current Optimized PID) / Overspeed Switch

24VDC / Packard Connector without Mating Connector / Perkins 404D-15, 404D-22 & Caterpillar C2.2T, C3.4

Multi-VDC / Automatic Synchronizer with Sync Check Relay