CH417-4572 | GAC JDR Series - 15 ft. 4.6m Harness / Built-in CANbus Termination Resistor 120Ω / 6-Terminal

24VDC / Terminal Strip

SDG Series - Deutsch Mating Connector Kit / SDG514 & 524 / 12-Terminal

10 Turn / 5KΩ / With Locking Shaft

USB to RS232 Adapter for PC Interface, GAC Recommended

MSP Military-Style (Amphenol) Sensor - Mating Connector Kit / With 90˚ Cable Clamp & Weather Boot / 2-Terminal

Multi-VDC / One Oxygen Sensor Input and EGT (Type-K Thermocouple) Input

ADD (Packard) Actuators - 6 ft. [1.8m] Harness with EC1300 / 2 Terminal

176 Series Installation Kit - For Bosch RS/RSV Governor / Left-Hand Rack / Mounts Actuator Directly to Intermediary Mechanical Governor Housing - Adapter Plate, Linkage, Gasket, Hardware

12VDC / Standard Unit / Flying Leads

5 in. [127mm] Thread Length / 12in. [305mm] Harness / Flying Leads / Stainless

12VDC / Packard Connector without Mating Connector / Mitsubishi L-Series L2E, L3E & S-Series S3L, S3L2, S4L, S4L2

CE-Compliant / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

Multi-VDC / Military-Style Connector without Mating Connector / Die-Cast Housing

12VDC / Packard Connector with Mating Connector EC1300 / Lesser Rate Return Spring SP203

1/4 in. I.D. End and 1/4-28 UNF-2B Thread 0.719 in. Deep

24VDC / Woodward Load Sharing & Synchronizing (0+/-3V DC Output) to GAC ESD / Including DEC2

24VDC / Standard Unit / Flying Leads

3.3 in. [84mm] - Actuator Stop Lever for 275 Series - 1/4 in. [6.35mm] Holes / Serrated Shaft

Multi-VDC / Standard Unit

2.7 in. [69mm] Thread Length / 1 ft. [0.3m] Shielded Cable / Flying Leads / Stainless

2.7 in. [69mm] Thread Length / 6 in. [152mm] Harness / Male Push-On Terminals

24VDC / Packard Connector with Mating Connector EC1300 / Includes KT188 Installation Kit

MSP Packard Sensors - Connector Kit Replacement / 2-Terminal

10 Turn / 5KΩ / With Knob

12VDC / Light-Force (Low-Current Optimized PID)

24VDC / Military-Style Connector without Mating Connector / Position Feedback Sensor (Novotechnik) / Note - Compatible with EEG6500 Series

Multi-VDC / Overspeed Switch

2.7 in. [69mm] Thread Length / 6 ft. [1.8m] Shielded Cable / Flying Leads / Stainless

12VDC / 13.0 lbf. [6.0 kg] / 0.50 ft-lb [0.68 J] Work / Male Push-On Terminals

24VDC / Full-Fuel Starting Aid

Non-CE / 24VDC / Isochronous Load Sharing / Load Anticipation / Droop / Forward and Reverse Power Monitoring and Reset Capability / Power Monitor Adjustment Control / Generator Power Ramping and Control

24VDC / Includes - EAM212 (Lean Burn Adapter), Wideband UEGO Sensor Bosch LSU4.2, Harnesses, 12-24V DC/DC Converter (PCI106)

295 Installation Kit - Spare (Included with Actuator) - Rack Linkages, Hardware

3.86 in. [98mm] Thread Length / 1 ft. [0.3m] Harness / Flying Leads / Aluminum Clear Anodized

2.3 in. [58mm] Thread Length / #8-32NC-2A Thread Stud Terminals / High Output 1.2kΩ

1/4-28 Precut to 1 ft. [0.3m], Zinc Plated